whirpool washing machine error

Whirpool front laod and top-load errors

Washing machines generally display error codes or blink LED lights to indicate specific faults. Below is a list of errors and their related issues.Each error code corresponds to a specific fault, helping users or technicians diagnose and resolve the issue efficiently.

Whirlpool Front Load Error Codes

Whirlpool Front Load Error Codes and Solutions

Error Code Description Solutions
F01 Inlet Error No Water Detected Entering Washer, check inlet valve resistance (1k to 4k). Replace valve if faulty, or check pressure sensor pipe for blockages or disconnections from the tub.
F03 Drain Error Check drain cap filter, pipe blockages, check drain motor operation, replace drain motor if found faulty.
F04 Heating Error Check heater resistance (zero ohms or open – replace heater), check heater wiring, and check temperature sensor resistance (zero ohms or open – replace temperature sensor).
F05 Temperature Sensor Error Check wiring to main PCB, check temperature sensor resistance (zero ohms or open – replace temperature sensor).
F06 Motor Overload Error Check for blocked or jammed drum, clothes stuck between tub and drum, motor resistance, and wiring continuity.
F07 Motor Disconnected Check motor wiring to PCB, replace motor if needed.
F10 Motor Overheating Check drum bearing and for drum damage. Let machine cool for 1 hour and restart.
F13 Door Lock Error Check if door is open, door lock pin fitting, door switch, and its wiring. Replace door switch, or if error persists, replace main PCB.
F18 Drain Issue Check drain hose for blockages, drain pump operation, wiring, and replace drain assembly if necessary.
FoD Suds Error Excessive detergent causes suds which can lead to drain pump failure or pressure sensing issues.
F20 PCB Heating Relay Failure Repair relay or replace main PCB.
F21 Communication Error Check wiring between main PCB and Display PCB. Replace main PCB and Display PCB one by one until problem is resolved.
F24 Overflow Error Check if inlet valve doesn’t cutoff water supply, check pressure sensor pipe for blockages or disconnections, replace pressure sensor if everything else is fine.
F26 PCB Error Repair PCB as pump driver isn’t working, or replace main PCB.
F27 Motor Detection Error Check motor wiring from main PCB and motor winding.
F29 Door Unlocking Error Check door switch or wiring.
FdL Door Locking Error Replace door switch.
F34 Spin Error Maximum speed not working, check if machine or laundry is unbalanced or overloaded.
F36 Water Level Sensing Error Pressure sensor fault.
F60 Main PCB Fault Repair or replace main PCB.
Contact Us for Appointment Whirlpool Top Load Non-Inverter Error Codes Repair Guide

Whirlpool Top Load Non-Inverter Error Codes Repair Guide

Error Code Description Solutions
PE Power Error Check power supply voltage with load. If error persists replace main PCB.
LE Lead Error Check door and door switch.
FE Filling Error (Inlet Water) Check water supply restrictions and pressure. Check inlet valve, check pressure sensor working if valve is ok.
dE Drain Error Check outlet pipe restrictions, check drain motor operation and voltage during operation. If voltage is ok then replace drain motor. If voltage is not ok then check wiring and main PCB.
E1 Pressure Sensor Error Check wiring of pressure sensor, if wiring is ok then replace pressure sensor. If sensor is ok then replace main PCB.
Component Test

washing machine parts testing click

Maintenance Tips Whirlpool click

error: Content is protected !!