| Error Code |
Description |
| E01 |
Door unlocked. |
| E02 |
Water filling issue. Possible inlet valve fault. |
| E03 |
Pump failure. |
| E04 |
Overflow error. Possible leaking. |
| E05 |
NTC or heater error. |
| E06 |
Motor failure. Possible open or short circuit or disconnected motor. |
| E08 |
Motor triac short circuit. |
| E10 |
Electronic pressure sensor issue. |
| H01 |
Water level sensor error. |
| H02 |
Motor triac error. |
| H04 |
Load relay short circuit error. |
| H05 |
Memory circuit PCB error. |
| H07 |
Tacho generator signal from irregular or out of range motor. |
| H09 |
Communication error between display and main PCB. |
| H12 |
Safety switch connection error. |
| H17 |
Thermistor error. |
| H18 |
Motor thermistor sensor error. |
| H21 |
Overflow error. |
| H23 |
Heater relay on main PCB. |
| H25 |
Motor connection error. |
| H27 |
Door lock cannot engage with the latch in place. |
| U11 |
Water draining error. Possible drain hose/filter blockage or drain pump failure. |
| U12 |
Door unlocked. |
| U13 |
Spin or Air Dry is not possible (washer dryers only). |
| U14 |
Water inlet error. |
| U18 |
Pump or drain filter found to be unstable. |
| U99 |
Water drain. |
