Beko washing machine error codes and repair guides
Voltas Beko Washing Machine Error Codes Repair Guide
| Error Code | Description | Solution |
|---|---|---|
| E0 | Top lid open | Close top lid. If error persists, check lid switch and its wiring. |
| E1 | Drain error | Check drain pipe blockages and clear them. If error persists, replace drain motor assembly. |
| E2 | Door switch error | Check if door is open during washing. If error persists, check wiring and door switch. Replace if faulty. |
| E3 | Unbalance error | Check leveling of machine and laundry distribution in drum. If error persists, replace all suspension. |
| E4 | Inlet error | Check water supply or tap, clean inlet filter, and check inlet valve and PCB supply. Replace if faulty. |
| E5 | Top lid opened during child lock | Close top lid and start again. |
| F1 | Pressure sensor error | Check wiring of sensor. If wiring is okay, replace pressure sensor. If error persists, replace main PCB. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.