How to repair samsung washing machine error codes

Samsung washing machine faults are displayed if any function or parts not working.

here are list of error and related faults given in table.

Samsung Top Load Washer Error Codes and Solutions

Below is a reference to common error codes for Samsung top-load washers, with potential causes and troubleshooting tips.

Error Code	Issue	Causes / Actions
1C	Water Level Sensor Problem	The water level sensor connection may be loose. Possible issue with the primary circuit board (PBA).
3C	Motor or Hall Sensor Problem	Loose PBA connector terminal. The motor’s spin net may be disconnected. Motor coil might be damaged (e.g., shorted or broken). Hall sensor connection may not be secure. Objects like screws may have entered the motor area. Motor is overloaded due to excess laundry. Potential PBA malfunction. Weak relay operation causing inaccurate signals from the hall sensor.
4C	Water Supply Problem	Blockage in water inlet valve. Disconnected terminal on water inlet valve. Hot and cold hoses connected improperly. Water temperature in certain cycles (e.g., drying, delicate) exceeds acceptable range.
5C	Drain Issue	Damaged pump motor impeller. Incorrectly connected connectors. Drain hose connections may be obstructed or damaged.
9C1 & 9C2	Power Supply Issue	Verify voltage levels, as this issue can result from power inconsistencies.
AC	Communication Error	Signal between main and secondary PBAs is not detected. Verify PBA connections are secure.
SF1, SF2, SF3	Microcontroller Issue	Malfunction in the microcontroller; may need main circuit board inspection or repair.

These codes can signal various internal issues; check connections, look for blockages, and contact a professional if errors continue.

Inlet Valve and testing

Inlet valve is easy to test visually or with multimeter , for testing other components click

know more

Samsung Front Load Washing Machine Error Code Repair

August 25, 2023

Error Code	Description	Solution
1C / E7 / LC	Water level sensor error	Check wiring of sensor, Check pipe of sensor, Replace pressure sensor
3C / EA / 8B / 8E / 3C1 / E3 / 3C2 / 3C3 / bE / 3C4	Motor error	Check main motor, Check hall sensor, Check wiring of main motor, Check overload
4C / E1 / nF / 4C1 / 4Cd / 4C2 / E8	Water supply error	Check inlet filter, Check inlet valve, Check water supply tank pressure, Check if woolen clothes are too much
5C / 5E / E5 / nd	Drain error	Check drain pump, Clean drain filter, Check outlet pipe, Check main PCB
9C1 / PH1 / E	Voltage error	Check input voltage, Voltage should be according to product specifications
9C2 / Plo / PF	Main PCB fault	Replace main PCB
AC / 13C / AE	Communication error	Check wiring between main and sub PCB, Check connectors, Change sub PCB
AC6	Communication error inverter PCB with Main PCB
bC1 / 12E / E2	Display PCB fault	Power button stuck, Other button fault
bC2 / 14C	Display PCB fault	Other button than power stuck
Cc / CE / cE	Wash heater or sensor fault	Replace heater, Replace sensor, Check wiring
dC / dE / eD / dS	Door lock error	Check door lock, Check door switch, Check wiring, Replace door switch
dL	Door lock error	Replace door switch
dC1 / dE1 / Lo / FL	Door lock not sensing	Replace door lock, Check wiring, Replace main PCB
dC2 / dE2	Power button fault	Replace display PCB
FC / F / FE	Drier fan error	Check fan motor connectors, Check fan motor belt, Check fan motor wiring
HC / HE / E5	Heater fault	Check wiring of wash heater, Check pressure sensor
HC2 / hE2 / Hr / E1 / EC / HC1 / HE1 / HC3	Steam not working	Check steam generator
LC / LC1 / 11E / E9	Water leakage detected	Check cause if water seen in base cover, If water not seen replace base sensor
OC / OE / OF / E3	Check pressure sensor tube	Check inlet valve working, Check outlet blocked
tC1 / tE1 / 6E / tC	Duct error	Check temperature sensor, Check pressure sensor, Check heater, Check wiring, Replace if faulty
tC3 / tE3	Dry heater fault	Dry heater, Dry heater sensor, Wiring related to dry heater, Replace if faulty
Ub / E4 / dC	Unbalance error	Check leveling of machine, Check load of laundry, Check drum suspension, Check drum shock absorbing
8C1 / E8	Mems PCB data error	Replace Mems PCB, If inbuilt replace main PCB
SUdS	Extra detergent in tub causing foaming	Wait for END symbol, it will be solved automatically

Samsung front load washing machine factory reset

Front Load Eco Bubble Washing Machine Factory Reset

Cleaning of Samsung washing machine

washing machine cleaning is most important thing to extend life .

Tub clean functions are available in each Samsung washing machine which should be operated once in each month.

power ON > set program on tub clean and start the machine.

Precaution- No laundry should be present in drum.

water supply must be ON.

Washing machine cleaning powder

you should use cleaning powder for better results.

take a pouch and put in dispenser before Turning ON.

Never use Detergent liquid or softener during tub cleaning.

Click to buy cleaning powder from Amazon

© 2024, mbmtech.in. All rights reserved.