Videocon Refrigerator Error Codes
| Error Code | Description | Solution |
|---|---|---|
| E1 | Ref-Sensor |
– Check the temperature sensor for damage. Replace if necessary. – Inspect wiring for any loose or broken connections and repair them. – Check ohm on multimeter; value should be 1 (open) or short (0). |
| E2 | Freezer-Sensor |
– Check the temperature sensor for damage. Replace if necessary. – Inspect wiring for any loose or broken connections and repair them. – Check ohm on multimeter; value should be 1 (open) or short (0). |
| E3 | Defrost-Sensor |
– Check the temperature sensor for damage. Replace if necessary. – Inspect wiring for any loose or broken connections and repair them. – Check ohm on multimeter; value should be 1 (open) or short (0). |
| E7 | Program Error | – Replace main PCB. |
| E9 | Communication Error |
– Check wiring between main PCB and display PCB. – If wiring is OK, replace display PCB and/or main PCB. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.