Murphy Richard Microwave Oven Error Codes
| Error Code | Description | Solution |
|---|---|---|
| E1 | Door not closed properly | Ensure the door is closed securely and check the latch. |
| E2 | Temperature sensor failure | Inspect and replace the temperature sensor if defective. |
| E3 | Power supply issue | Check the power outlet and ensure stable voltage supply. |
| E4 | Magnetron failure | Inspect the magnetron for faults and replace it if necessary. |
| E5 | Control board error | Unplug the microwave for a few minutes to reset it; replace if needed. |
| E6 | Cooling fan malfunction | Ensure the cooling fan is operational; clear any blockages. |
| E7 | Turntable motor problem | Inspect the turntable motor and replace it if it is not working. |
| E8 | Humidity sensor error | Check the humidity sensor; clean or replace if defective. |
| E9 | Internal communication error | Reset the microwave by unplugging it. Contact a technician if it continues. |
| E10 | Relay stuck error | Unplug the microwave, then plug it back in. Inspect the relay if needed. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.