Onida microwave oven error codes

Onida Microwave Oven Error Codes

Onida Microwave Oven Error Codes

Error Code Description Solution
E1 Door not closed properly Ensure the door is fully closed and check the latch for issues.
E2 Temperature sensor failure Inspect the temperature sensor and replace if faulty.
E3 Power supply issue Check the power outlet and ensure stable voltage supply.
E4 Magnetron failure Check the magnetron for faults; professional repair may be required.
E5 Control board error Unplug the microwave for a few minutes to reset it; replace control board if necessary.
E6 Cooling fan malfunction Ensure the cooling fan is operating and clear any blockages.
E7 Turntable motor issue Inspect and replace the turntable motor if it’s not functioning properly.
E8 Humidity sensor error Check the humidity sensor and replace if defective.
E9 Internal communication error Reset the microwave by unplugging it. If it persists, consult a technician.
E10 Relay stuck error Unplug and reconnect the microwave. Inspect the relay if the issue continues.
Post Disclaimer

The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.