Elica Dishwasher Error Codes and Solutions
| Error Code | Description | Solution |
|---|---|---|
| E1 | Water Supply Error | Check the water inlet and water tap. Ensure that the water supply line is properly connected and has sufficient pressure. Replace the water inlet valve if needed. |
| E2 | Water Drainage Error | Inspect the drain hose and pump for clogs or obstructions. Clean the filter if blocked, and check if the pump needs replacement. |
| E3 | Overflow/Leakage Error | Check for any leaks around the dishwasher. Inspect seals, hoses, and connections, and ensure they are secure and free from damage. Replace flow meter if required. |
| E4 | Temperature Sensor Error | Check the temperature sensor (thermistor) for any issues. Replace it if it shows signs of damage. |
| E5 | Heating Element Error | Verify the heating element and wiring. If the element does not heat up, it may need to be replaced. |
| E6 | Water Level Sensor Error | Inspect the water level sensor for proper operation. Replace if necessary to ensure the dishwasher fills to the correct level. |
| E7 | Motor Malfunction | Check the circulation motor and impeller for any blockages or damage. Replace the motor if it’s not functioning correctly. |
| E8 | Door Lock Error | Ensure the door is fully closed and the lock mechanism is functioning. Replace the door lock sensor if it’s defective. |
| E9 | Overflow Protection Activated | This error occurs when excess water is detected in the dishwasher. Inspect for leaks, and check the float switch or overflow sensor. |
| EA | Detergent Dispenser Malfunction | Check the detergent dispenser for blockages and clean it. If it fails to open, it may require replacement. |
| EC | Communication Error | Check wiring between main and display PCB. Replace main PCB and display PCB if wiring is okay. |
| F1 | Electrical Fault | Main PCB or wiring short due to heavy current consumption. Check defective components before replacement of PCB and wiring. |
| F2 | Filter Blockage | Clean the filter and ensure it is clear of debris. Clean filter each week regularly. |
| F3 | Water Leak Detected | Look for water pooling inside the dishwasher. Check for any cracks or loose fittings that might be causing the leak. |
| F4 | Pump Error | Inspect the drain pump for any blockages and test its operation. Replace the pump if it is faulty. |
Dishwasher repair and installation in Nashik Maharashtra, All brands Dishwasher repair, All brands Dishwasher Error Codes, MBM TECH SERVICES NASHIK