whirpool refrigerator error

Error Code	Description	Repair Method
E1	Fridge Temperature Sensor Error	Check the fridge sensor and replace if it’s faulty.
E2	Freezer Temperature Sensor Error	Inspect the freezer sensor for damage and replace as needed.
E3	Defrost Sensor Error	Test the defrost sensor and wiring; replace if defective.
E4	Compressor Error	Ensure proper ventilation; check compressor operation and replace if necessary.
E5	Fan Error	Inspect the evaporator and condenser fans for obstructions; replace if faulty.
E6	Door Open Error	Check the door switch for functionality and replace if needed.
E7	Power Failure Error	Check the power supply and reset the refrigerator if necessary.
E8	Ice Maker Error	Inspect the ice maker for blockages or mechanical issues; replace if needed.
E9	Water Filter Error	Replace the water filter or ensure proper installation.
E10	Communication Error	Check wiring connections between the control board and sensors; reset if needed.

Whirlpool Side-by-Side Refrigerator Error Troubleshooting

Error Code	Description	Solutions
E0	Cooling loss or Open Door	Check fan motor, gas leakage, gas choke, or door open for longer than 10 minutes.
E1	Refrigerator Temperature Sensor error	Check wiring of temperature sensor to main PCB and sensor in refrigerator compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E2	Freezer Sensor error	Check wiring of temperature sensor to main PCB and sensor in freezer compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E3 or F3	Defrost Sensor error	Check wiring of temperature sensor to main PCB and evaporator defrost sensor in freezer compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E4	Fridge Defrost Sensor	Check wiring of temperature sensor to main PCB and evaporator defrost sensor in refrigerator compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E5	Freezer Defrost Sensor Error	Check wiring of temperature sensor to main PCB and evaporator defrost sensor in freezer compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E6	Communication Error	Check wiring of main PCB to display PCB.
E7	Exit Sensor error	Check ambient sensor, wiring of temperature sensor to main PCB, and evaporator defrost sensor in freezer compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
E8	Sealed System Error	This is likely related to the compressor, refrigerant levels, or other cooling components.
E9	Freezer High Temperature Error	The freezer door may have been left open for longer than 3 minutes.
PC	Pantry Room Temperature Sensor Error	Check pantry sensor, wiring of temperature sensor to main PCB, and sensor in pantry compartment. Test with multimeter on resistance range; value should be between 1.5k to 3k ohm at 30°C.
SY or CE	Communication Error	Check wiring from main PCB to display PCB. Replace PCBs one by one to test.
rd	Defrost Error	Check heater, thermal fuse, wiring between main PCB and heater, and bimetal if present.
DF	Fan Motor Error	Check fan motor externally and verify wiring.

For booking an appointment, please visit: https://mbmtech.in/contact-customer-care-mbmtech/