Thomson Washing Machine Error Codes
| Error Code | Description | Solution |
|---|---|---|
| E1 | Water Supply Error | Check if the water tap is open and the water supply is sufficient. Ensure the inlet hose is not kinked or blocked. |
| E2 | Drainage Error | Ensure the drain hose is positioned correctly and not clogged. Check the pump filter for any blockage. |
| E3 | Door Lock Error | Make sure the door is closed properly. Inspect the door lock mechanism for any damage. |
| E4 | Water Level Sensor Error | Examine the water level sensor for faults and ensure the connections are secure. |
| E5 | Temperature Sensor Error | Check the temperature sensor for issues or faulty wiring. It may need to be replaced. |
| E6 | Motor Error | Inspect the motor and its connections for any problems. The motor may need servicing or replacement. |
| E7 | Heating Element Error | Verify the heating element is functioning correctly and not damaged. Test the electrical connections. |
| E8 | Overflow Error | Ensure the water level sensor is working properly. Check for leaks or excessive water supply. |
| E9 | Unbalanced Load Error | Redistribute the clothes evenly in the drum and try running the wash cycle again. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.