Onida Refrigerator Error Codes and Solutions
| Error Code | Description | Solution |
|---|---|---|
| E1 | Temperature sensor error in the refrigerator compartment | Check the sensor for any faults or loose connections. Replace if necessary. |
| E2 | Temperature sensor error in the freezer compartment | Inspect the freezer temperature sensor and connections. Replace the sensor if damaged. |
| E3 | Defrost sensor error | Verify the defrost sensor functionality. Repair or replace the sensor if it’s not working. |
| E4 | Defrost heater error | Check the defrost heater for continuity. Replace if the heater is defective. |
| E5 | Refrigerator fan motor error | Inspect the fan motor for any blockages or malfunctions. Replace the motor if needed. |
| E6 | Freezer fan motor error | Examine the freezer fan motor. Ensure it’s not obstructed and replace if faulty. |
| E7 | Communication error between main control board and display board | Check the wiring connections between the boards. Replace the control board if required. |
| E8 | Refrigerant leak or compressor error | Inspect the refrigerant lines for leaks. If the compressor is faulty, seek professional repair. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.