Lloyd Topload Washing Machine Error Codes
| Error Code | Description | Solutions |
|---|---|---|
| E1 | Inlet Error |
– Check water supply or tap – Check inlet valve if faulty – Check main PCB if faulty – Check wiring between main PCB and inlet valve |
| E2 | Pressure Sensor Error |
– Check wiring continuity between main PCB and pressure sensor – Replace sensor – Replace PCB if faulty |
| E3 | Door Error |
– Check door position – Check door switch – Check wiring between main PCB and door switch – Check main PCB |
| E4 | Unbalance Error |
– Check leveling of machine – Check laundry uneven in drum – Check suspension – Check drum alignment |
| E5 | Drain Error |
– Check drain pipe blockages – Check drain motor operation – Check wiring – Check main PCB |
| E8 | High Level Water | – During sensing water level, pressure sensor or PCB may be faulty |
Front Load Washing Machine Error Codes and Resolutions
| Error Code | Description | Resolution |
|---|---|---|
| dF | Door lock error | Check door lock, door switch, wiring. Door switch may be faulty. |
| SF | Water supply error | Check pipe blockage, inlet valve, main PCB, wiring. |
| _F | Drain error | Check outlet pipe, drain filter, drain pump, main PCB, wiring. |
| LF | Low water level | Check for drain pipe support damage, pipe leaking, pressure sensor pipe blockages. |
| HU, LU | Voltage error | Check power supply with multimeter, inspect for loose connections, L-N-E wiring swapping. |
| bF | Button error | Inspect display PCB for button short or press; repair or replace control PCB. |
| CF | Communication error | Check wiring between PCBs; replace both PCBs if wiring is intact. |
| HO | Over temperature error | Inspect sensor, heater, PCB; restart the machine. |
| PF | Water level sensor error | Check wiring between sensor and PCB, inspect water level sensor (pressure sensor), PCB. |
| rF | Motor error | Check voltage on motor; replace motor if voltage is correct. |
| tF | Temperature sensor error | Check sensor resistance, terminal connectors, wiring, main PCB. |
| -F | High water level error | Inspect pressure sensor pipe blockages, drain pump, inlet valve. |
| UF | Unbalance error | Level the machine, balance laundry, inspect suspension. |
How to check parts of washing machine
Washing Machine FAQ
How much laundry fill in drum?
75% of drum capacity.
Why clothes not dry better?
Check leveling and spin RPM setting.
How much water can be required for 1 wash?
Around 40 to 80 liters (approximately 10–20 gallons).
How much electricity consume in 1 wash?
350 watts to 500 watts.
When tub clean required?
After each 40 washes.
What should use in tub clean?
Descale powder or tablet.