Electrolux Microwave Oven Error Codes
| Error Code | Description | Solution |
|---|---|---|
| E1 | Door not closed properly | Ensure the door is securely closed and check the latch mechanism. |
| E2 | Temperature sensor failure | Inspect the temperature sensor and replace it if necessary. |
| E3 | Power supply issue | Check the power outlet and ensure stable voltage supply to the microwave. |
| E4 | Magnetron failure | Inspect the magnetron for faults; it may require professional replacement. |
| E5 | Control board error | Unplug the microwave for a few minutes to reset it; consider replacement if the issue persists. |
| E6 | Cooling fan malfunction | Ensure the cooling fan is operational and clear of obstructions. |
| E7 | Turntable motor problem | Check the turntable motor and replace it if it is not functioning. |
| E8 | Humidity sensor error | Check and replace the humidity sensor if it is defective. |
| E9 | Internal communication error | Reset the microwave by unplugging it; consult a technician if the issue continues. |
| E10 | Relay stuck error | Unplug and reconnect the microwave; inspect the relay for faults if the issue persists. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.