Electrolux Inverter AC Error Codes
| Error Code | Description | Solution |
|---|---|---|
| E1 | High pressure protection | Check the refrigerant level and ensure proper ventilation; clean any obstructions in the condenser. |
| E2 | Indoor unit coil sensor error | Inspect the indoor coil sensor; replace it if it’s defective. |
| E3 | Outdoor unit malfunction | Check the outdoor unit for issues such as fan failure or compressor malfunction. |
| E4 | Outdoor unit coil sensor error | Test the outdoor unit’s coil sensor and replace it if necessary. |
| E5 | Communication error between indoor and outdoor units | Inspect the communication wiring between the units; repair or replace damaged wires. |
| E6 | Compressor overload protection | Check the compressor for overheating or overloading; ensure proper airflow and ventilation. |
| F1 | Indoor temperature sensor error | Check the indoor temperature sensor for faults and replace it if needed. |
| F2 | Outdoor temperature sensor error | Inspect the outdoor temperature sensor and replace it if necessary. |
| H1 | Defrost mode | This is a normal function; the system is defrosting. Wait for the mode to complete. |
| P1 | Low voltage protection | Check the power supply; ensure stable voltage. Consider using a voltage stabilizer. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.