| Error Code |
Description |
Solution |
| E1 |
Door not closed properly. |
Ensure the microwave door is fully closed and latched. Check the door latch for any obstruction. |
| E2 |
Temperature sensor error. |
Inspect the temperature sensor for disconnection or damage. Replace the sensor if necessary. |
| E3 |
Overheating error. |
Allow the microwave to cool down. Ensure that there is proper ventilation and that air vents are not blocked. |
| E4 |
Magnetron malfunction. |
Check the magnetron and its connections. If it is faulty, it may need to be replaced. |
| E5 |
Internal wiring issue. |
Inspect the internal wiring for any damage. If there are issues, consider seeking professional repair. |
| E6 |
Fan error. |
Check if the cooling fan is working properly. Clean any debris or blockages around the fan. |
| E7 |
Control board error. |
Unplug the microwave and wait a few minutes before plugging it back in. If the error persists, the control board may need to be replaced. |
| E8 |
Inverter error (if applicable). |
Inspect the inverter and connections. If the inverter is faulty, it may need replacement. |
| E9 |
Short circuit in wiring. |
Check the internal wiring for damage or loose connections. Consult a technician if you are not comfortable with electrical repairs. |
| E10 |
Capacitor error. |
Inspect the capacitor for any faults. If it is damaged, it should be replaced by a qualified technician. |
| E11 |
Input error. |
Check the control panel for any stuck buttons. Ensure the panel is functioning properly and not blocked by debris. |
| E12 |
Heat sensor error. |
Inspect the heat sensor for damage or disconnection. Replace the sensor if it is malfunctioning. |
| E13 |
Cook time error. |
Ensure that the cooking time is set correctly. Reset the microwave and try again. |
| E14 |
Door switch error. |
Verify that the door switches are functioning properly. Test or replace any faulty door switches. |
| E15 |
Timer error. |
Unplug the microwave for a few minutes, then plug it back in to reset the timer function. |
| E16 |
Power supply error. |
Ensure that the microwave is plugged in securely and that the outlet is functioning. Try using a different outlet if necessary. |
| E17 |
Overload protection error. |
Remove some of the contents and allow the microwave to cool down. |
| E18 |
Interference error (usually caused by nearby appliances). |
Move any other electronic devices away from the microwave to avoid interference. |
| E19 |
Safety thermostat trip. |
Allow the microwave to cool down completely. Check for proper ventilation and ensure the air vents are not blocked. |
| E20 |
Miscellaneous error. |
Unplug the microwave for a few minutes to reset it and consult the user manual for additional troubleshooting steps. |
