Whirlpool Microwave Oven Error Codes
Error Code | Description | Solution |
---|---|---|
F1 | Touchpad or control board issue | Reset the microwave by unplugging it for a few minutes. If the problem persists, the touchpad or control board may need replacement. |
F2 | Relay stuck on control board | Unplug the microwave and plug it back in after a few minutes. If the issue continues, the relay or control board may need to be serviced. |
F3 | Temperature sensor error | Inspect the temperature sensor and replace it if it’s faulty. |
F4 | Humidity sensor malfunction | Check and clean the humidity sensor. If the error persists, replace the sensor. |
F5 | Power failure detected | Ensure the microwave is connected to a stable power source. If the error remains, seek professional assistance. |
F6 | Microwave relay issue | Contact a technician to inspect and replace the microwave relay if necessary. |
F7 | Magnetron problem | Check the magnetron and replace it if it’s defective. This may require professional help. |
F8 | Fan motor problem | Inspect the cooling fan for any obstructions and ensure it is working properly. Replace if necessary. |
F9 | Communication error between components | Reset the microwave by unplugging it. If the error persists, professional service may be required. |
F10 | Inverter board issue | Inspect the inverter board for any issues. If the problem continues, the board may need to be replaced. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.