Dishwasher Error
Temperature Sensor Error
Normal LED: Off
Heavy LED: Flashes
Delicate LED: Flashes
Smart Auto LED: Flashes
Heater Error
Normal LED: Flashes
Heavy LED: Off
Delicate LED: Off
Smart Auto LED: Flashes
High Temperature Heating Error
Normal LED: Off
Heavy LED: Flashes
Delicate LED: Flashes
Smart Auto LED: Off
Drain Error
Normal LED: Off
Heavy LED: Off
Delicate LED: Flashes
Smart Auto LED: Off
Button Error
Normal LED: Flashes
Heavy LED: Off
Delicate LED: Flashes
Smart Auto LED: Off
Door Open Alarm
Normal LED: Off
Heavy LED: Off
Delicate LED: Flashes
Smart Auto LED: Flashes
Communication Error
Normal LED: Flashes
Heavy LED: Flashes
Delicate LED: Flashes
Smart Auto LED: Flashes
Water Leakage Error
Normal LED: Off
Heavy LED: Flashes
Delicate LED: Off
Smart Auto LED: Off
Over Level Water Error
Normal LED: Off
Heavy LED: Flashes
Delicate LED: Off
Smart Auto LED: Flashes
Error Codes and Solutions
Error Code | Error Description | Solutions |
---|---|---|
tE | Temperature Sensor Error | NTC thermistor fault; check open/short to verify before replacement. |
HE | Heater Error | Check wiring and open/shorts to verify before replacement. |
IE | High Temperature Error | If temperature increases above 80°C, error will generate; parts may require sensor and/or PCB. |
9E | Water Level Low Error | During wash, water level goes to low level; possible cause may be water level sensor and/or main PCB. |
PE | Half Load Function Error | Distributor motor, micro switch, or main PCB may cause this error. |
4E | Inlet Error | Inlet valve, flow meter, or main PCB may cause this error. |
3E | High Temperature Water Error | Thermistor or main PCB may cause this error. |
5E | Drain Error | Drain pump, water level sensor, or main PCB may cause this error. |
oE | Over Level Water Error | Inlet valve, flow meter, or main PCB may cause this error. |
LE | Leakage Error | Tub and sump leakage, water leakage sensor, or PCB may cause this error. |
bE | Button Error | Main PCB or display PCB may cause this error. |
dE | Door Error | Door switch or main PCB may cause this error. |
CE | Communication Error | Touch PCB, sub PCB, main PCB, and wiring may cause this error. |