LG Washing Machine Error Codes Repair Guides
| Error Code | Description |
|---|---|
| OE – Drain Error | This error indicates a problem with draining water from the machine. Check for clogs in the drain hose or filter. Check drain motor. Check supply from main PCB to drain motor. If supply is not available on motor terminal then replace main PCB. You can also get a repair for main PCB in Nashik city. Just contact us. |
| UE – Unbalanced Error | Check machine leveling. Check suspension; if required, replace it. Check clothes tangling in the machine. |
| DE – Door Error | Check if door is closed. Check door switch if front load washing machine. Check Door Magnet if top load washing machine. Check main PCB. |
| LE – Motor Error | This indicates a problem with the motor. It could be due to a wiring issue or a faulty motor itself. |
| PE – Pressure Sensor Error | Check pressure sensor and its wiring connection with motor. Replace pressure sensor if wiring is okay. Replace main PCB if pressure sensor and wiring are okay. Washing machine PCB can be repaired. Just contact us. |
| CE – Overcurrent Error | CE suggests an overcurrent in the motor. Check drum rotation. Check if drum is jammed. Replace motor if drum rotation is free. |
| IE – Inlet Error | IE points to a problem with water inlet. Check water pressure if low. Check water tank; if empty then refill. Check water tap; if closed, then open. Check inlet valve resistance value with multimeter; it should be 2K to 5K range. If it is zero or no value then replace inlet valve. If valve is okay then check wiring to main PCB. If wiring is okay then replace main PCB. Main PCB can be repaired. Just contact us. |
| FE – Overflow Error | FE indicates that the machine detects an overflow of water. Check inlet valve if faulty. Water should be off after pressing PAUSE button during normal wash mode. |
| TE – Temperature Sensor Error | Check temperature sensor value on multimeter. It will show 2k to 10k if it is OK. Check wiring to main PCB if sensor is okay. Replace main PCB if sensor and wiring are okay. Main PCB can be repaired. |
| dE1 or dE2 – Door Lock Error | These codes relate to door lock problems. |
| PF – Power Failure | PF indicates a power failure during the cycle. Restart the machine once power is restored. |
LG front load washing machine Non Display error codes
LG Top Load Washing Machine Error Codes and Solutions
| Error Code | Description | Solutions |
|---|---|---|
| IE | Inlet Error |
|
| OE | Outlet/Drain Error |
|
| UE | Unbalance Error |
|
| FE | Overflow Error |
|
| dE | Door Error |
|
| PE | Pressure Sensor Error |
|
| AE | Auto Off Error |
|
| E3 | Motor Error |
|
LG Top Load Washing Machine Test Run
| Step | Description |
|---|---|
| Method | Press Water Level + Process + Power buttons simultaneously. All LED lights will turn ON, and the display will show a code from 64 to 69. |
| Start Button |
|
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.