LG Microwave Oven Error Codes
Error Code | Description | Solution |
---|---|---|
F1 | Touchpad or control board issue | Reset the microwave by unplugging it for a few minutes. If the issue persists, the touchpad or control board may need to be replaced. |
F3 | Temperature sensor problem | Check the temperature sensor for damage and replace it if necessary. |
F4 | Humidity sensor error | Inspect the humidity sensor and clean it. If the error continues, consider replacing the sensor. |
SE | Keypad short-circuit | Unplug the microwave for a few minutes to reset it. If the error persists, the keypad may need to be repaired or replaced. |
EH/EH0 | Power supply voltage issue | Check if the microwave is connected to a stable power source. If the problem continues, contact a technician. |
HE | Heater failure | Inspect the heating element for any issues and replace it if needed. |
DO | Door open error | Ensure the microwave door is completely closed and the door latch is functioning properly. |
CD | Cooling down message | The microwave is cooling down after use. Wait for a few minutes for the message to disappear. |
TE1 | Thermistor error | Inspect the thermistor and replace it if defective. |
F9 | Microwave relay failure | Contact a technician to inspect the relay and replace it if needed. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.