Kelvinator Airconditioner error codes

Kelvinator Inverter Air Conditioner Error Codes
Error Code Description Solution
E1 Indoor Unit Sensor Error Check and replace the indoor temperature sensor if faulty.
E2 Outdoor Unit Sensor Error Inspect and replace the outdoor temperature sensor if necessary.
E3 Compressor Protection Error Ensure the compressor is not overheating; check for proper airflow.
E4 Communication Error Check wiring connections between indoor and outdoor units; fix any issues.
E5 Refrigerant Leakage Error Inspect for refrigerant leaks; recharge the system and repair as needed.
E6 High Pressure Protection Error Look for blockages in the refrigerant lines; clear any obstructions.
E7 Low Pressure Protection Error Ensure refrigerant levels are adequate; check for leaks and recharge if necessary.
E8 Drainage Error Inspect the drainage system for blockages; clean the drain line.
E9 Fan Motor Error Check the fan motor operation; replace if the fan is not functioning properly.
E10 Power Supply Error Inspect the power supply and voltage; reset the unit if necessary.
Post Disclaimer

The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.