How to repair washing machine error
Washing machines generally display error codes or blink LED lights to indicate specific faults. Below is a list of errors and their related issues.Each error code corresponds to a specific fault, helping users or technicians diagnose and resolve the issue efficiently.
Error Code | Description | Possible Cause | Solution |
---|---|---|---|
E1 | Water Supply Error | Water tap is closed, low water pressure, or inlet hose is blocked. | Open the water tap, ensure sufficient water pressure, and check for blockages in the inlet hose. |
E2 | Drainage Error | Drain hose is clogged or improperly positioned. | Clear the drain hose and ensure it is positioned correctly. |
E3 | Door Lock Error | Washing machine door is not closed properly. | Ensure the door is securely closed and the lock mechanism is functioning. |
E4 | Unbalanced Load Error | Clothes inside the drum are unevenly distributed. | Redistribute the clothes to balance the load in the drum. |
E5 | Temperature Sensor Error | Faulty temperature sensor or heating issue. | Check the sensor and replace it if faulty. Also, inspect the heating element. |
E6 | Motor Error | Overloading or motor malfunction. | Reduce the load, inspect the motor, and check wiring connections. |
E7 | Overflow Protection Error | Water level exceeds safe limit. | Check the water inlet valve and inspect the drainage system. |
E8 | Heating Error | Water is not heating due to a malfunctioning heating element. | Inspect and replace the heating element if necessary. |
E9 | Water Level Sensor Error | Malfunctioning water level sensor or blockage in the sensor. | Clean or replace the water level sensor. |
F1 | Communication Error | Issue with communication between the control board and motor. | Check wiring connections, or replace the control board if needed. |