Bosch Microwave Oven Error Codes
Error Code | Description | Solution |
---|---|---|
E01 | Door not closed properly | Check the door latch and ensure it is closed properly. |
E02 | Temperature sensor failure | Inspect the temperature sensor and replace it if necessary. |
E03 | Power supply issue | Check the power source and ensure a stable voltage supply. Contact an electrician if needed. |
E04 | Magnetron failure | Inspect the magnetron for defects. If faulty, it requires professional replacement. |
E05 | Control board error | Reset the microwave by unplugging it for a few minutes. Replace the control board if the error persists. |
E06 | Cooling fan malfunction | Check the cooling fan and ensure it is working properly. Replace if necessary. |
E07 | Turntable motor problem | Inspect the turntable motor and replace if it is not functioning correctly. |
E08 | Humidity sensor error | Check the humidity sensor and replace if it is defective. |
E09 | Internal communication error | Reset the microwave by unplugging it. If the error continues, contact a technician for service. |
E10 | Relay stuck error | Unplug the microwave, then plug it back in. If the issue persists, inspect the relay for faults. |
Post Disclaimer
The content provided by MBMTech Services is for informational purposes only. While we strive to ensure the accuracy of the information and instructions, repairs and troubleshooting procedures can be complex and may vary depending on the specific product, model, or situation. Attempting to repair electronic devices or products yourself carries the risk of further damage, injury, or voiding warranties. MBMTech Services is not responsible for any damage, loss, or injury that may occur as a result of following the advice, instructions, or techniques presented in our videos or content. We strongly recommend consulting a professional technician for repairs or technical support. Use the information at your own risk.