| F1 |
Touchpad or control board issue |
Reset the microwave by unplugging it for a few minutes. If the issue persists, the touchpad or control board may need to be replaced. |
| F3 |
Temperature sensor problem |
Check the temperature sensor for damage and replace it if necessary. |
| F4 |
Humidity sensor error |
Inspect the humidity sensor and clean it. If the error continues, consider replacing the sensor. |
| SE |
Keypad short-circuit |
Unplug the microwave for a few minutes to reset it. If the error persists, the keypad may need to be repaired or replaced. |
| EH/EH0 |
Power supply voltage issue |
Check if the microwave is connected to a stable power source. If the problem continues, contact a technician. |
| HE |
Heater failure |
Inspect the heating element for any issues and replace it if needed. |
| DO |
Door open error |
Ensure the microwave door is completely closed and the door latch is functioning properly. |
| CD |
Cooling down message |
The microwave is cooling down after use. Wait for a few minutes for the message to disappear. |
| TE1 |
Thermistor error |
Inspect the thermistor and replace it if defective. |
| F9 |
Microwave relay failure |
Contact a technician to inspect the relay and replace it if needed. |
