Intec washing machine error codes

Intec Washing Machine Error Codes
Error Code Description Possible Cause Solution
E1 Water Supply Error Water supply is turned off or hose is blocked. Check the water tap and clear any blockages in the hose.
E2 Drainage Error Drain hose is clogged or the pump is malfunctioning. Inspect and clear the drain hose and check the pump.
E3 Door Lock Error The door is not securely locked during operation. Make sure the door is fully closed and the lock is engaged.
E4 Unbalanced Load Error Clothes are unevenly distributed in the drum. Redistribute the load evenly inside the drum.
E5 Temperature Sensor Error The temperature sensor is malfunctioning. Check and replace the temperature sensor if necessary.
E6 Motor Error Motor overload or malfunction detected. Reduce the load and inspect motor connections for issues.
E7 Overflow Protection Error Water level exceeds safe limits. Inspect the water inlet valve and drainage system for leaks.
E8 Heating Error The heating element is not functioning properly. Inspect and replace the heating element if needed.
E9 Water Level Sensor Error Malfunction of the water level sensor. Clean or replace the water level sensor as necessary.
F1 Communication Error Communication issue between the control board and motor. Check wiring connections and replace the control board if required.
Call us